| |
|
|
 |
|
| Before Leaving the Office |
| |
- Make sure all images have been downloaded from the Memory Card to the computer in the office.
- Make sure the battery in the camera is fully charge
- Make sure you have all equipment including: Spare Battery Spare Memory Card Lens Cleaning Cloth Dust removing Air Blower Camera Tripod Panoramic Lens Any Lens Adaptors Any Step Rings for Lens Connection
|
| |
| To Ensure The Best Possible Virtual Tours |
| |
- Ensure all lenses are perfectly clean: Camera Lens Panoramic Lens Glass Surface Conical Reflective Mirror on the Panoramic Lens
- Mount camera on tripod, securely, with lens pointing vertically.
- Attach any necessary Adaptor to the camera
- Attach any necessary Step Rings to the Lens (Do not over tighten)
- Expose Lens by pulling down the cover
- Attach Lens to the camera (Do not over tighten)
- Adjust tripod until Optic is vertical (refer to bubble level on top of Optic).
- Turn Camera Power on.
- Turn Mode Dial to "C1" where the settings have previously been saved
- Fold out the LCD Screen and adjust rotation for easy viewing
- Position the Camera on the tripod in the best location within the room to be photographed. This is usually the centre of the room but anywhere near should be fine.
- Check that Optic is still perfectly vertical (refer to bubble level on top of Optic) and adjust accordingly.
- Click the Shutter button and leave the room, only returning when image has been taken. Please remember that if using AEB 3 pictures will be taken and that in low light conditions the shutter may remain open for as much as 10 seconds after you have heard the shutter sound.
- Repeat steps 11 to 13 until all photo’s are complete.
|
| |
|
|
